Bacharach PCA3 Spécifications télécharger pdf (Page 31)

PCA



3 Manual

0024-9473 Rev 4 31

Figure 4-9. Configuring for Boiler Temperature

4.10. Date Setup

The date is stored in the format: DD/MM/YY. Its value is part of the date and time

stamp that is saved along with each combustion test record. Set the analyzer’s

internal clock to the current date as follows.

1. Display the MAIN MENU by pressing the MENU (F2) button. If

necessary, press ESC until MENU appears above F2.

2. Use the ▲▼ buttons to highlight SETUP, and then press ENT to display

the SETUP MENU.

3. Use the ▲▼ buttons to highlight DATE, and then press ENT to display

the DATE MENU.

4. First use the

◄►

buttons to move the cursor across the screen until it is

over the digit to be changed, and then press the ▲▼ buttons until the

desired value is displayed.

5. Repeat Step 4 until the values for month, day, and year have been set.

6. Press ENT to save the selection and re-display the SETUP MENU, or

press ESC to abort this procedure and retain the old date values.

NOTE: The real time clock is powered by the main batteries

and is maintained by a coin cell battery on the Main PCB in

the absence of batteries. Bacharach recommends changing

the coin cell (P/N 0204-0020) every 5 years.

Figure 4-10. Date Setup

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 103 104

Pas de commentaire

Bacharach PCA3 Spécifications Page 31