Bacharach INJECTOR CALIBRATOR CD3 Spécifications Page 43

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 96
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 42
Instructions 67-9319 Bacharach, Inc. Page 3-17
INJECTOR CALIBRATOR CD3 OPERATION
Injector Cam P/N Cam ID
53, 71, 92 & 92 M 77-0610 53,71,92
149 67-6372 149
8.2L 77-0610 53,71,92
8. Fit the cam in place on the camshaft and make
sure key in the cam is properly seated.
NOTE: It is a good practice to check that
the cam does not wobble on the camshaft.
If wobble exists, dress the camshaft where
required as applicable.
9. Secure the cam with the washer and hex nut.
10. Remove pushrod lock.
The calibrator is now ready for mounting DD
Injectors. Procedures for mounting DD injectors
vary according to the style of the injector:
Type 53, 71, 92 or 92 M Section 3.9
Type 149 Section 3.10
Type 8.2 liter Section 3.11
Follow the mounting procedure for the style
injector you have.
Figure 3-37. Cam & Hardware
6 Washer and Nut5 Cam
(
Cam 189 Shown
)
Vue de la page 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 95 96

Commentaires sur ces manuels

Pas de commentaire