Bacharach Portable Combustion Analyzer Spécifications télécharger pdf (Page 33)

PCA



3 Manual

0024-9472 Rev 3 33

8. At this time, either return to Step 6 to choose another line to edit, or end

this procedure by highlighting Edit Complete and pressing the ENT key

to return to the Edit Test ID Menu.

9. Press ESC to go to the Test ID Menu or the RUN/HOLD key to return to

the Run/Hold screen.

Figure 4-13. Editing a Test ID

4.14.2. Selecting a Test ID

1. From the Test ID menu, use the ▲▼ buttons to highlight SELECT

TEST ID, and then press ENT to display the SELECT TEST ID menu,

which displays the first line of each Test ID record.

Figure 4-14. Selecting a Test ID

2. Use the ▲▼ buttons to choose a pre-entered Test ID or choose NO

Test ID (located at bottom of list) to deselect a previously chosen

record, then press ENT to make the selection and return to the Test ID

menu.

3. Press ESC to end the procedure and return to the Setup Menu or press

the RUN/HOLD key to return to the Run/Hold Screen.

4.14.3. Clearing Test ID Information

1. From the Test ID menu, use the ▲▼ buttons to highlight CLEAR TEST

ID, and then press ENT to display the CLEAR TEST ID menu.

2. Do one of the following to clear Individual Records or All Records.

Individual Records: Use the ▲▼ buttons to highlight Individual

Records, then press ENT to display the Clear Individual menu. Again

use the ▲▼ buttons to highlight the individual record to clear, then

press ENT to clear the record.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 99 100

Pas de commentaire

Bacharach Portable Combustion Analyzer Spécifications Page 33