Bacharach Portable Combustion Analyzer Spécifications télécharger pdf (Page 48)

PCA



3 Manual

48 0024-9472 Rev 3

differential pressure between the two areas is now

displayed on the PRESSURE screen. If the pressure at

the +∆P port is higher than the –∆P port, then the pressure

reading will be positive. If it is lower, then the reading will

be negative.

Figure 5-11. Pressure Zero Screen

Figure 5-12. Draft/Pressure Measurement

Hose Connections

5.9. Saving Test Data

Up to 500 individual sets (“snap shots”) of combustion test, pressure, or

temperature data can be saved in memory, which can later be recalled for

viewing from the Memory Directory (see Recalling Combustion Test Data section

on page 54).

1. First display the screen that contains the data to be saved. In the

example below, all data associated with the Combustion Test RUN

screen will be saved.

2. Press the SAVE (F3) button to save the test data in the next available

memory location.

NOTE: When memory is full, the next reading will not be

saved until space is made available by clearing the data

(see Clearing Memory section on page 56).

Figure 5-13. Saving Test Data

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 99 100

Pas de commentaire

Bacharach Portable Combustion Analyzer Spécifications Page 48