Bacharach Portable Combustion Analyzer Spécifications télécharger pdf (Page 34)

PCA



3 Manual

34 0024-9472 Rev 3

All Records

3. Press ESC to end this procedure and return to the Test ID menu or

press the RUN/HOLD key to return to the Run/Hold screen.

: Use the ▲▼ buttons to highlight All Records, then press

ENT to display the Clear All menu. Again use the ▲▼ buttons to

highlight Yes, then press ENT to clear all records.

Figure 4-15. Clearing a Test ID

4.15. User Name

The name of the user or owner of the analyzer (e.g., company name, address,

phone number) can be stored in memory by manually entering up to three lines

of text, with each line containing up to 20 alphanumeric characters. This

information will appear at the top of each printout until new information is entered

or cleared.

NOTE: To save time, user name information can be entered using

the Fyrite

User Software.

4.15.1. Entering a User Name

1. Display the MAIN MENU by pressing the MENU (F2) button. If

necessary, press ESC until MENU appears above F2.

2. Use the ▲▼ buttons to highlight SETUP, and then press ENT to display

the SETUP MENU.

3. Use the ▲▼ buttons to highlight USERNAME, and then press ENT to

display all three lines of the EDIT USERNAME screen. Periods(.....)

identify empty lines.

4. Use the ▲▼ buttons to choose which of the three Username lines to

edit, then press ENT to begin editing the chosen line.

5. Use the ▲▼ buttons to enter the desired character and then move to

the next character position by pressing the right arrow key. Repeat this

step until the line is complete. A maximum of 20 alphanumeric

characters can be entered.

6. Press ENT to accept the entered information.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 99 100

Pas de commentaire

Bacharach Portable Combustion Analyzer Spécifications Page 34