Bacharach Portable Combustion Analyzer Spécifications télécharger pdf (Page 36)

PCA



3 Manual

36 0024-9472 Rev 3

4.16. Language

Information on the display screen can be shown in English, French, or Spanish.

Select the desired language as follows.

1. Display the MAIN MENU by pressing the MENU (F2) button. If

necessary, press ESC until MENU appears above F2.

2. Use the ▲▼ buttons to highlight SETUP, and then press ENT to display

the SETUP MENU.

3. Use the ▲▼ buttons to highlight LANGUAGE SELECTION, and then

press ENT to display The Language Selection Menu.

4. Use the ▲▼ buttons to highlight the desired language, then press ENT

to activate the selection and re-display the Setup Menu.

Figure 4-18. Selecting a Language

4.17. Cal Reminder Period

The analyzer can be set to indicate a calibration reminder during the 60 second

warm-up period. Calibration reminders can be preset to occur never or at 6, 8,

10, 12, or 15 months after the last calibration. When the preset period is

exceeded the instrument will display the reminder, and how long since the

sensors were last calibrated. The reminder will be displayed at the end of the 60

second warm-up period. If a calibration reminder is displayed the operator can

press the RUN/HOLD key to move to the Run/Hold screen for normal operation.

Regular calibration periods of 6 months to a year for all gas sensors (except

Oxygen) are recommended. Set the calibration reminder period as follows.

1. Display the MAIN MENU by pressing the MENU (F2) button. If

necessary, press ESC until MENU appears above F2.

2. Use the ▲▼ buttons to highlight SETUP, and then press ENT to display

the SETUP MENU.

3. Use the ▲▼ buttons to highlight CAL REMINDER PERIOD, and then

press ENT to display CAL Reminder Period Menu.

4. Use the ▲▼ buttons to highlight the desired CAL reminder period, and

then press the ENT key to activate the selection and re-display the

Setup Menu.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 99 100

Pas de commentaire

Bacharach Portable Combustion Analyzer Spécifications Page 36